跳到内容

Beamer is a powerful and flexible LaTeX class to create great looking presentations. This article outlines the basis steps to making a Beamer slideshow: creating the title page, adding a logo, highlighting important points, making a table of contents and adding effects to the slideshow.

Introduction

A minimal working example of a simple beamer presentation is provided below.

\documentclass{beamer}
%Information to be included in the title page:
\title{Sample title}
\author{Anonymous}
\institute{Overleaf}
\date{2021}

\begin{document}

\frame{\titlepage}

\begin{frame}
\frametitle{Sample frame title}
This is some text in the first frame. This is some text in the first frame. This is some text in the first frame.
\end{frame}

\end{document}

 Open this beamer document in Overleaf


BeamerExample1OverleafUpdated.png

After compilation, a two-page PDF file will be produced. The first page is the titlepage, and the second one contains sample content.

The first statement in the document declares this is a Beamer slideshow: \documentclass{beamer}

The first command after the preamble, \frame{\titlepage}, generates the title page. This page may contain information about the author, institution, event, logo, and so on. See the title page section for a more complete example.

The frame environment creates the second slide, the self-descriptive command \frametitle{Sample frame title} is optional.

It is worth noting that in beamer the basic container is a frame. A frame is not exactly equivalent to a slide, one frame may contain more than one slides. For example, a frame with several bullet points can be set up to produce a new slide to reveal each consecutive bullet point.

Beamer main features

The Beamer class offers some useful features to bring your presentation to life and make it more attractive. The most important ones are listed below.

The title page

There are some more options for the title page than the ones presented in the introduction. The next example is a complete one, most of the commands are optional.

\title[About Beamer] %optional
{About the Beamer class in presentation making}

\subtitle{A short story}

\author[Arthur, Doe] % (optional, for multiple authors)
{A.~B.~Arthur\inst{1} \and J.~Doe\inst{2}}

\institute[VFU] % (optional)
{
  \inst{1}%
  Faculty of Physics\\
  Very Famous University
  \and
  \inst{2}%
  Faculty of Chemistry\\
  Very Famous University
}

\date[VLC 2021] % (optional)
{Very Large Conference, April 2021}

\logo{\includegraphics[height=1cm]{overleaf-logo}}

Beamer-titlepageUpdated.png

 Open an example of the beamer package in Overleaf


The distribution of each element in the title page depends on the theme, see the Themes subsection for more information. Here is a description of each command:

\title[About Beamer] {About the Beamer class...}
This is important, the title of your presentation must be inside braces. You can set an optional shorter title in the square brackets: in the example, this is About Beamer.
\subtitle
Subtitle for you presentation. This can be omitted if unnecessary.
\author[Arthur, Doe]{A.~B.~Arthur\inst{1} \and J.~Doe\inst{2}}
First, a short version of the authors' names, comma separated, can be added inside square brackets. This is optional, if omitted the full name is displayed (at the bottom of the title page in the example). Then, inside braces, are the full names of the authors, separated by an \and command. There's also a \inst{1} command that puts a superscript to reference the institution where each author works; it's optional and can be omitted if there is only one author or the listed authors work at the same institution.
\institute[VFU]{\inst{1}Faculty...
In the argument of this command, you can declare the institute each author belongs to. The parameter inside brackets, the acronym of the institute/university, is optional. Then the name of the institute is added inside braces; if there's more than one institute they must be separated with an \and command. The \institute command is optional, but it is required for the superscripts inserted by the \inst commands in the previous code.
\date[VLC 2021]{Very Large Conference, April 2021}
In this declaration, you can set the name and date of the event where you are going to present your slides. The parameter inside brackets is an optional shorter name, in this example is displayed at the bottom of the title page.
\logo{\includegraphics...}
This adds a logo to be displayed. In this theme, the logo is set at the lower right corner. You can use text, or include an image.

Creating a table of contents

Usually when you have a long presentation, it's convenient to divide it into sections or even subsections. In this case, you can add a table of contents at the beginning of the document. Here is an example:

\begin{frame}
\frametitle{Table of Contents}
\tableofcontents
\end{frame}

BeamerEx2Overleaf.png

As you see, is simple. Inside the frame environment you set the title and add the command \titlepage.

It's also possible to put the table of contents at the beginning of each section and highlight the title of the current section. Just add the code below to the preamble of your LaTeX document:

\AtBeginSection[]
{
  \begin{frame}
    \frametitle{Table of Contents}
    \tableofcontents[currentsection]
  \end{frame}
}

BeamerEx3Overleaf.png

If you use \AtBeginSubsection[] instead of \AtBeginSection[], the table of contents will appear at the beginning of each subsection.

 Open an example of the beamer package in Overleaf


Adding effects to a presentation

In the introduction, we saw a simple slide using the \begin{frame} \end{frame} delimiters. It was mentioned that a frame is not equivalent to a slide, and the next example will illustrate why, by adding some effects to the slideshow. In this example, the PDF file produced will contain 4 slides—this is intended to provide a visual effect in the presentation.

\begin{frame}
\frametitle{Sample frame title}
This is a text in second frame. 
For the sake of showing an example.

\begin{itemize}
 \item<1-> Text visible on slide 1
 \item<2-> Text visible on slide 2
 \item<3> Text visible on slide 3
 \item<4-> Text visible on slide 4
\end{itemize}
\end{frame}

 Open this frame in Overleaf (using \usetheme{Madrid})


In the code there's a list, declared by the \begin{itemize} \end{itemize} commands, and next to each item is a number enclosed in two special characters: < >. This will determine in which slide the element will appear, if you append a - at the end of the number, the item will be shown in that and the subsequent slides of the current frame, otherwise it will appear only in that slide. Check the animation for a better understanding of this.

These effects can be applied to any type of text, not only to the itemize environment. There's a second command whose behaviour is similar, but it's simpler since you don't have to specify the slides where the text will be unveiled.


\begin{frame}
 In this slide \pause

 the text will be partially visible \pause

 And finally everything will be there
\end{frame}

 Open this frame in Overleaf (using \usetheme{Madrid})


This code will generate three slides to add a visual effect to the presentation. \pause will prevent the text below this point and above the next \pause declaration to appear in the current slide.

 Open an example of the beamer package in Overleaf


Highlighting important sentences/words

In a presentation is a good practice to highlight the important points to make it easier for your audience to identify the main topic.

\begin{frame}
\frametitle{Sample frame title}

In this slide, some important text will be
\alert{highlighted} because it's important.
Please, don't abuse it.

\begin{block}{Remark}
Sample text
\end{block}

\begin{alertblock}{Important theorem}
Sample text in red box
\end{alertblock}

\begin{examples}
Sample text in green box. The title of the block is ``Examples".
\end{examples}
\end{frame}

 Open this frame in Overleaf (using \usetheme{Madrid})


BeamerHighlights.png

If you want to highlight a word or a phrase within a paragraph, the command \alert{} will change the style of the word inside the braces. The way the enclosed text will look depends on the theme you are using.

To highlight a paragraph with concepts, definitions, theorems or examples, the best option is to put it inside a box. There are three types of box, and it's up to you to decide which one better fits in your presentation:

\begin{block}{Remark} \end{block}
A block box will wrap the text in a box with the same style as the rest of the presentation. The text inside the braces after the \begin{block} code is the title of the box.
\begin{alertblock}{Important theorem} \end{alertblock}
The same as block but the style contrasts the one used by the presentation.
\begin{examples} \end{examples}
Again, is very similar to block, the box has a different style but less contrasting than alertblock.

Customizing your presentation

There are some aspects of a Beamer presentation that can be easily customized. For instance, you can set different themes, colours and change the default text layout into a two-column format.

 Open an example of the beamer package in Overleaf


Themes and colorthemes

It's really easy to use a different theme in your slideshow. For example, the Madrid theme (most of the slideshows in this article use this theme) is set by adding the following command to the preamble:

\usetheme{Madrid}

Below are two more examples.

Berkeley theme

You can  open this LaTeX code in Overleaf to explore the Berkeley theme.

BerkeleyThemeExample.png

Copenhagen theme

You can  open this LaTeX code in Overleaf to explore the Copenhagen theme.

CopenhagenThemeExample.png

Using a colortheme

A theme can be combined with a colortheme to change the colour used for different elements.

\documentclass{beamer}
\usetheme{Madrid}
\usecolortheme{beaver}

You must put the \usecolortheme statement below the \usetheme command. You can  open this LaTeX code in Overleaf to explore the Madrid theme with the beaver colortheme. For various options, check out the table of screenshots of different themes and colorthemes in the Reference guide below.

Fonts

You can change several parameters about the fonts. Here we will mention how to resize them and change the type of font used.

Font sizes

The font size, here 17pt, can be passed as a parameter to the beamer class at the beginning of the document preamble: \documentclass[17pt]{beamer}. Below is an example showing the result of using the 17pt font-size option:

\documentclass[17pt]{beamer}
\usepackage{tikz}
\usetheme{Madrid}
\usecolortheme{beaver}
\title[About Beamer] %optional
{Madrid theme + beaver}
\subtitle{Demonstrating larger fonts}
\author[Arthur, Doe] % (optional)
{A.~B.~Arthur\inst{1} \and J.~Doe\inst{2}}

\institute[VFU] % (optional)
{
  \inst{1}%
  Faculty of Physics\\
  Very Famous University
  \and
  \inst{2}%
  Faculty of Chemistry\\
  Very Famous University
}

\date[VLC 2021] % (optional)
{Very Large Conference, April 2021}

% Use a simple TikZ graphic to show where the logo is positioned
\logo{\begin{tikzpicture}
\filldraw[color=red!50, fill=red!25, very thick](0,0) circle (0.5);
\node[draw,color=white] at (0,0) {LOGO HERE};
\end{tikzpicture}}
\begin{document}
\frame{\titlepage}
%Highlighting text
\begin{frame}
\frametitle{Demonstrating large fonts}

In this slide, some important text will be
\alert{highlighted} because it's important.
Please, don't abuse it.

\begin{block}{Remark}
Sample text
\end{block}

\end{frame}
\end{document}

 Open this beamer document in Overleaf


BeamerLargeFontSize.png


Available font sizes are 8pt, 9pt, 10pt, 11pt, 12pt, 14pt, 17pt, 20pt. Default font size is 11pt (which corresponds to 22pt at the full screen mode).

Font types

To change the font types in your beamer presentation there are two ways, either you use a font theme or import directly a font from your system. Let's begin with a font theme:

\documentclass{beamer}
\usefonttheme{structuresmallcapsserif}
\usetheme{Madrid}

 Open a beamer document using these settings in Overleaf


The \usefonttheme{} is self-descriptive. The available themes are: structurebold, structurebolditalic, structuresmallcapsserif, structureitalicsserif, serif and default.

You can also import font families installed in your system.

\documentclass{beamer}
\usepackage{bookman}
\usetheme{Madrid}

 Open a beamer document using these settings in Overleaf


The command \usepackage{bookman} imports the bookman family font to be used in the presentation. The available fonts depend on your LaTeX installation, the most common are: mathptmx, helvet, avat, bookman, chancery, charter, culer, mathtime, mathptm, newcent, palatino, and pifont.

Columns

Sometimes the information in a presentation looks better in a two-column format. In such cases use the columns environment:

\begin{frame}
\frametitle{Two-column slide}
\begin{columns}
\column{0.5\textwidth}
This is a text in first column.
$$E=mc^2$$
\begin{itemize}
\item First item
\item Second item
\end{itemize}

\column{0.5\textwidth}
This text will be in the second column
and on a second thoughts, this is a nice looking
layout in some cases.
\end{columns}
\end{frame}

 Open this frame in Overleaf (using \usetheme{Madrid})


After the frame and frametitle declarations start a new columns environment delimited by the \begin{columns} \end{columns}. You can declare each column's width with the \column{0.5\textwidth} code, a lower number will shrink the width size.

 Open an example of the beamer package in Overleaf


Reference guide

Below is a table with screenshots of the title page and a normal slide in Beamer using different combinations of themes (rows) and colorthemes (columns). To have a complete list of themes and colorthemes see the further reading section for references.

default beaver beetle seahorse wolverine
default Default default 1.png Default default 2.png Default beaver 1a.png Default beaver 2a.png Default beetle 1.png Default beetle 2.png Default seahorse 1.png Default seahorse 2.png Default wolverine 1.png Default wolverine 2.png
AnnArbor Annarbor default 1.png Annarbor default 2.png Annarbor beaver 1.png Annarbor beaver 2.png Annarbor beetle 1.png Annarbor beetle 2.png Annarbor seahorse 1.png Annarbor seahorse 2.png Annarbor wolverine 1.png Annarbor wolverine 2.png
Antibes Antibes default 1.png Antibes default 2.png Antibes beaver 1.png Antibes beaver 2.png Antibes beetle 1.png Antibes beetle 2.png Antibes seahorse 1.png Antibes seahorse 2.png Antibes wolverine 1.png Antibes wolverine 2.png
Bergen Bergen default 1.png Bergen default 2.png Bergen beaver 1.png Bergen beaver 2.png Bergen beetle 1.png Bergen beetle 2.png Bergen seahorse 1.png Bergen seahorse 2.png Bergen wolverine 1.png Bergen wolverine 2.png
Berkeley Berkeley default 1.png Berkeley default 2.png Berkeley beaver 1.png Berkeley beaver 2.png Berkeley beetle 1.png Berkeley beetle 2.png Berkeley seahorse 1.png Berkeley seahorse 2.png Berkeley wolverine 1.png Berkeley wolverine 2.png
Berlin Berlin default 1.png Berlin default 2.png Berlin beaver 1.png Berlin beaver 2.png Berlin beetle 1.png Berlin beetle 2.png Berlin seahorse 1.png Berlin seahorse 2.png Berlin wolverine 1.png Berlin wolverine 2.png
Boadilla Boadilla default 1.png Boadilla default 2.png Boadilla beaver 1.png Boadilla beaver 2.png Boadilla beetle 1.png Boadilla beetle 2.png Boadilla seahorse 1.png Boadilla seahorse 2.png Boadilla wolverine 1.png Boadilla wolverine 2.png
CambridgeUS CambridgeUS default 1.png CambridgeUS default 2.png CambridgeUS beaver 1.png CambridgeUS beaver 2.png CambridgeUS beetle 1.png CambridgeUS beetle 2.png CambridgeUS seahorse 1.png CambridgeUS seahorse 2.png CambridgeUS wolverine 1.png CambridgeUS wolverine 2.png
Copenhagen Copenhagen default 1.png Copenhagen default 2.png Copenhagen beaver 1.png Copenhagen beaver 2.png Copenhagen beetle 1.png Copenhagen beetle 2.png Copenhagen seahorse 1.png Copenhagen seahorse 2.png Copenhagen wolverine 1.png Copenhagen wolverine 2.png
Darmstadt Darmstadt default 1.png Darmstadt default 2.png Darmstadt beaver 1.png Darmstadt beaver 2.png Darmstadt beetle 1.png Darmstadt beetle 2.png Darmstadt seahorse 1.png Darmstadt seahorse 2.png Darmstadt wolverine 1.png Darmstadt wolverine 2.png
Goettingen Goettingen default 1.png Goettingen default 2.png Goettingen beaver 1.png Goettingen beaver 2.png Goettingen beetle 1.png Goettingen beetle 2.png Goettingen seahorse 1.png Goettingen seahorse 2.png Goettingen wolverine 1.png Goettingen wolverine 2.png
PaloAlto Paloalto default 1.png Paloalto default 2.png Paloalto beaver 1.png Paloalto beaver 2.png Paloalto beetle 1.png Paloalto beetle 2.png Paloalto seahorse 1.png Paloalto seahorse 2.png Paloalto wolverine 1.png Paloalto wolverine 2.png
Szeged Szeged default 1.png Szeged default 2.png Szeged beaver 1.png Szeged beaver 2.png Szeged beetle 1.png Szeged beetle 2.png Szeged seahorse 1.png Szeged seahorse 2.png Szeged wolverine 1.png Szeged wolverine 2.png
Warsaw Warsaw default 1.png Warsaw default 2.png Warsaw beaver 1.png Warsaw beaver 2.png Warsaw beetle 1.png Warsaw beetle 2.png Warsaw seahorse 1.png Warsaw seahorse 2.png Warsaw wolverine 1.png Warsaw wolverine 2.png


Further reading

For more information, see the full package documentation here. The following resources may also be useful:

Overleaf guides

LaTeX Basics

Mathematics

Figures and tables

References and Citations

Languages

Document structure

Formatting

Fonts

Presentations

Commands

Field specific

Class files

Advanced TeX/LaTeX