BAU Postgrad (MS-PhD) Thesis-Template
作者:
Machbah Uddin
最近上传:
2 年前
许可:
Creative Commons CC BY 4.0
摘要:
This is the project template for MS and PhD thesis writing at Bangladesh Agricultural University.
\documentclass[a4paper,12pt,oneside]{book}
\input{package-settings.tex} % the packages and their settings in a separate file
%%%%%%%%%%%%%%%%%%%% Some new custom commands %%%%%%%%%%%%%%%%%
\newcommand{\blanklineR}{\hfill \\} %to have blanklines
\newcommand{\HeadingR}[1]{% font size 14 and boldface for headings
%\fontsize{14}{21}{% baselinestrech 1.5, so 14*1.5=21
%\selectfont
{\large %large equals 14pt when the document is 12pt
\bfseries{#1}}}
\newcommand{\titleR}{A Wonderful Title of Your Thesis/Dissertation} %title strored as command so that I can adapt easily if any change occurs
%%%%%%%%%%%%%%%%% PDF meta-data %%%%%%%%%%%%%%%%%%%%%%%%
\hypersetup{%
pdfauthor={Your name},
pdftitle=\titleR,
pdfsubject={MSc Eng. Thesis},
pdfkeywords={}
}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%% DOCUMENT STARTS %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{document}
\frontmatter
%%%%%%%%%%%%%%%%%%% Title Page %%%%%%%%%%%%%%%%%%%%%
\begin{titlepage}
\phantomsection
\addcontentsline{toc}{part}{Title Page} %declaring as part rather than chapter so that I can differentiate the formatting in TOC
\centering
%\begin{onehalfspacing}
%\linespread{1.3}
\HeadingR{My research title is here}\\
%\end{onehalfspacing}\\
\blanklineR\blanklineR\blanklineR
by\\
\blanklineR\blanklineR\blanklineR
\textbf{Author name Mr Rahim}\\
\blanklineR\blanklineR\blanklineR\blanklineR
A thesis submitted in partial fulfillment of the requirements for the degree of \\
Master of Science in Computer Science\\
Department of Computer Science and Mathematics\\
Bangladesh Agricultural University\\
\blanklineR\blanklineR\blanklineR
\includegraphics[width=0.26\textwidth]{Figures/bau.jpg}\\
\blanklineR\blanklineR\blanklineR
Bangladesh Agricultural University \\\
Mymensingh-2202, Bangladesh\\
\blanklineR
\textbf{March 2023}
\end{titlepage}
\newpage
%%%%%%%%%%%%%%%%% Declaration %%%%%%%%%%%%%%%%%%%%%%%%%%
\addtocounter{page}{1} %otherwise, this page number becomes (i)
\phantomsection \label{declar}
\addcontentsline{toc}{part}{Declaration}
\begin{center}
\HeadingR{Declaration}\\
\end{center}
\blanklineR\blanklineR\blanklineR
This is to certify that the thesis work entitled \textit{"my title"} has been carried out by \textit{Mr Rahim} in the Department of \textit{Computer Science and Mathematics}, Bangladesh Agricultural University, Mymensingh, Bangladesh. The above thesis work or any part of this work has not been submitted anywhere for the award of any degree or diploma.\\[2cm]
\begin{center}
\begin{tabular}{*2c}
\parbox{0.49\textwidth}{\centering Signature of Supervisor} & \parbox{0.49\textwidth}{\centering Signature of Candidate}
\end{tabular}
\end{center}
%%%%%%%%%%%%%%%%%%% Title Page %%%%%%%%%%%%%%%%%%%%%
\begin{titlepage}
\phantomsection
\addcontentsline{toc}{part}{Title Page} %declaring as part rather than chapter so that I can differentiate the formatting in TOC
\centering
%\begin{onehalfspacing}
%\linespread{1.3}
\HeadingR{my titlel}\\
\blanklineR\blanklineR\blanklineR\blanklineR
%\end{onehalfspacing}\\
\text{A Thesis }
\blanklineR
\text{Submitted to }
\blanklineR
\text{Bangladesh Agricultural University, Mymensingh-2202}
\blanklineR
\text{In particular of the Requirements for the degree of}
\blanklineR
\text{Master of Science }
\blanklineR
\text{in}
\blanklineR
\text{Computer Science }
\blanklineR\blanklineR\blanklineR
By\\
\textbf{Mr Rahim}
\blanklineR
\text{Examination Roll No: ww}
\blanklineR
\text{ Registration No: ww}
\blanklineR
\text{Session: 2021-2022}
\blanklineR\blanklineR\blanklineR
Bangladesh Agricultural University \\\
Mymensingh-2202, Bangladesh\\
\blanklineR\blanklineR
\textbf{March 2023}
\end{titlepage}
%%%%%%%%%%%%%%%%% Approval %%%%%%%%%%%%%%%%%%%%%%%%%%
\newpage
\phantomsection \label{approval}
\addcontentsline{toc}{part}{Approval}
\begin{center}
\HeadingR{Approval}
\blanklineR
\end{center}
This is to certify that the thesis work submitted by \textit{Mr Rahim} entitled \textit{Test title} has been approved by the board of examiners for the partial fulfillment of the requirements for the degree of \textit{Master of Science (M. Sc. )} in the Department of \textit{Computer Science and Mathematics}, Bangladesh Agricultural University, Mymensingh, Bangladesh in April 2023.
\begin{center}
\vspace{5mm}
\begin{singlespacing}
\begin{tabular}{p{1mm}p{0.7\textwidth}>{\centering\arraybackslash}p{0.2\textwidth}}
1. & \rule{0.32\textwidth}{\arrayrulewidth}\newline Prof. Dr. Karim\newline Professor\newline Department of Computer Science and Mathematics\newline Bangladesh Agricultural University & Chairman (Supervisor)\\[6em]
2. & \rule{0.32\textwidth}{\arrayrulewidth}\newline Dr. Jamal \newline Assistant Professor\newline Co-Supervisor
\newline Department of Computer Science and Mathematics\newline Bangladesh Agricultural University & Co-Supervisor\\[6em]
3. & \rule{0.32\textwidth}{\arrayrulewidth}\newline Prof. Dr. Kaml \newline Professor\newline Chairman, Examination Committee \newline and Head Department of Computer Science and Mathematics & Head\\[6em]
\end{tabular}
\end{singlespacing}
\end{center}
%%%%%%%%%%%%%%%%%%% Title Page %%%%%%%%%%%%%%%%%%%%%
\begin{titlepage}
\phantomsection
\addcontentsline{toc}{part}{Title Page} %declaring as part rather than chapter so that I can differentiate the formatting in TOC
\centering
%\begin{onehalfspacing}
%\linespread{1.3}
\HeadingR{My title}\\
\blanklineR\blanklineR\blanklineR
%\end{onehalfspacing}\\
\text{A Thesis }
\blanklineR
\text{Submitted to }
\blanklineR
\text{Bangladesh Agricultural University, Mymensingh-2202}
\blanklineR
\text{In particular of the Requirements for the degree of}
\blanklineR
\text{Master of Science }
\blanklineR
\text{in}
\blanklineR
\text{Computer Science }
\blanklineR\blanklineR
By\\
\textbf{Author}
\blanklineR
\text{$Approved$ $as$ $to$ $the$ $style$ $and$ $contents$ $by$ }
\blanklineR\blanklineR\blanklineR
\begin{center}
\begin{tabular}{*2c}
\parbox{0.49\textwidth}{\centering Prof. Dr. ZZZ \blanklineR \centering Professor\blanklineR \centering (Supervisor)} & \parbox{0.49\textwidth}{\centering Prof. Dr. ZZZ \blanklineR \centering Assistant Professor\blanklineR \centering (Co-Supervisor)}
\end{tabular}
\end{center}
\blanklineR\blanklineR\blanklineR
\textbf{---------------------------------------------}
\blanklineR
\textbf{Prof. Dr. ZZZ}
\blanklineR
\text{Chairman, Examination Committee}
\blanklineR
\text{\&}
\blanklineR
\text{Head, Department of Computer Science \& Mathematics}
\blanklineR
\text{Bangladesh Agricultural University}
\blanklineR
\text{Mymensingh-2202, Bangladesh}
\blanklineR\blanklineR
\textbf{March 2023}
\end{titlepage}
%%%%%%%%%%%%%%%%%%%% Acknowledgments %%%%%%%%%%%%%%%%%%%%%%%%%
\newpage
\phantomsection \label{ack}
\addcontentsline{toc}{part}{Acknowledgments}
\begin{center}
\HeadingR{Acknowledgments}
\end{center}
All Praise to Almighty ALLAH, for giving us the blessing, the strength, the chance and endurance to complete this study.
\blanklineR \blanklineR
\textit{\textbf{April 2023}} \hfill \textit{\textbf{Author}}
%%%%%%%%%%%%%%%%%%%% Abstract %%%%%%%%%%%%%%%%%%%%%%%%%
\newpage
\phantomsection \label{abstr}
\addcontentsline{toc}{part}{Abstract}
\begin{center}
\HeadingR{Abstract}
\end{center}
Bangladesh is an Agricultural Country. This is my abstract
%%%%%%%%%%%%%%%%%%% Contents %%%%%%%%%%%%%%%%
\newpage
\currentpdfbookmark{\contentsname}{toc}
\begin{singlespacing}
\tableofcontents
\end{singlespacing}
%%%%%%%%%%%%%%% Include list of tables (and in table of contents) %%%%%%%%%%%%%%%
\newpage
\phantomsection \label{listoftab}
\addcontentsline{toc}{part}{List of Tables}
\listoftables
\addtocontents{lot}{\textbf{Table No}\hfill \textbf{Description}\hfill\textbf{Page}\par} %to pring above the page numbers
% Include list of figures (and in table of contents)
\newpage
\phantomsection \label{listoffig}
\addcontentsline{toc}{part}{List of Figures}
\listoffigures
\addtocontents{lof}{\textbf{Figure No}\hfill \textbf{Description}\hfill\textbf{Page}\par} %to pring above the page numbers
%%%%%%%%%%%%%%%%%%%% Acknowledgments %%%%%%%%%%%%%%%%%%%%%%%%%
\newpage
\phantomsection \label{abbrv}
\addcontentsline{toc}{part}{List of Acronyms}
\begin{center}
\HeadingR{\MakeUppercase{List of Acronyms}}
\blanklineR \blanklineR
\begin{longtable}{l@{\qquad}l}
BAU & Bangladesh Agricultural University \\
\end{longtable}
\end{center}
\mainmatter
\bookmarksetup{startatroot} %front and backmatters are defined as part; so the bookmark hierarchy of the below chapters falls below the part, whereas I want them in the same level. This command from bookmark package works like a charm
%%%%%%%%%%%%%%%%%%%%%% Introduction %%%%%%%%%%%%%%%%%%%%%%%%%%%%
\chapter{Introduction}\label{chap:intro}
THis is our introduction and cite my paper as~\cite{bird2020optimisation}.
In BAU, we are doing quality research~\cite{grewal2023hyperspectral}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% Literature Review %%%%%%%%%%%%%%%%%%%%%%%
\chapter{Literature Review}\label{chap:lit_review}
My literature goes here.
This is my literature review~\ref{fig:lit}.
\begin{figure}[htb!]
\begin{center}
\includegraphics[width=0.6\linewidth]{Figures/Literature/literature.jpeg}
\caption{Figure title}
\label{fig:lit}
\end{center}
\end{figure}
\section{Literature review overview}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% Methodology %%%%%%%%%%%%%%%%%%%%%%%
\chapter{Methodology}\label{chap:method}
This is the method.
\section{THis is section 1}\label{sec:sec_1}
go for level
\section{THi is section 2}
adsf asdf
\subsection{This is subsection 2}
Process is described in Fig.~\ref{fig:transFeature}.
\begin{figure}[htb!]
\begin{center}
\includegraphics[width=0.6\linewidth]{Figures/Methods/Method.jpg}
\caption{Figure title}
\label{fig:transFeature}
\end{center}
\end{figure}
\section{test title figure}
this sadfi sdis the text.
sda fasdf asfd
asdf asdf
asdf asd
f
asdf
asdf
this sadfi sdis the text.
sda fasdf asfd
asdf asdf
asdf asd
f
asdf
asdf
this sadfi sdis the text.
sda fasdf asfd
asdf asdf
asdf asd
f
asdf
asdf
this sadfi sdis the text.
sda fasdf asfd
asdf asdf
asdf asd
f
asdf
asdf
this sadfi sdis the text.
sda fasdf asfd
asdf asdf
asdf asd
f
asdf
asdf
this sadfi sdis the text.
sda fasdf asfd
asdf asdf
asdf asd
f
asdf
asdf
this sadfi sdis the text.
sda fasdf asfd
asdf asdf
asdf asd
f
asdf
asdf
this sadfi sdis the text.
sda fasdf asfd
asdf asdf
asdf asd
f
asdf
asdf
Our test result table .\ref{tab:my-table}
\begin{table}[]
\caption{Performance asdf}
\label{tab:my-table}
\begin{tabular}{ll}
\hline
\multicolumn{1}{|c|}{\textbf{Dataset}} & \multicolumn{1}{c|}{\textbf{Method}} \\ \hline
adsf & dsaf \\
afds & asdf
\end{tabular}
\end{table}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\chapter{Conclusions and Future Works}\label{chap:concl}
In this study, this is the conclusion
\textbf{Future Work:}
In future work, this is my future work
%\appendix
%\appendixpage
%\addappheadtotoc
%\input{"Mathematical\space definitions/draft"}
\backmatter
%\setstretch{1}
%\include{"Bibliography/draft"}
% Change title of bibliography to References
\renewcommand\bibname{References}
% Make sure "references" is in the header
% \fancyhead[RE]{\bfseries REFERENCES} % if I make it for two-sided book-like printing
% \fancyhead[R]{\bfseries REFERENCES} % if I make it for single-sided printing
% Place it in the table of contents
\newpage
\phantomsection \label{refs}
\addcontentsline{toc}{part}{References}
% Declare style
%\bibliographystyle{plainnat}
% \bibliographystyle{plain}
\printbibliography[title={REFERENCES}, notsubtype=this thesis]
%printing publication from this thesis; entrysubtype={this thesis} is mentioned in corresponding bib file
\nocite{hasan2021how,hasan2021effect,hasan2021tuning}
%\newrefcontext[labelprefix=J]
\printbibliography[title={Publications from this Thesis}, subtype=this thesis, resetnumbers=true]
\addcontentsline{toc}{part}{Publications from this Thesis}
\end{document}